Synthetic EAL Solutions for Mining
Mining Needs High Performance Lubrication
Mining is one of the most heavily regulated industries on earth, and environmental scrutiny is only growing. Tailings ponds, sensitive watersheds, reclamation sites, and Indigenous lands all impose tightening expectations on what operators put into their equipment. Hydraulic ruptures, gearbox leaks, and grease discharge are no longer just maintenance issues. They are environmental incidents with reporting, financial, and social-license consequences.
BioMax™ delivers synthetic Environmentally Acceptable Lubricants (EALs) engineered for environmentally sensitive surface and underground mining. BioMax lubricants are readily biodegradable, exhibit low aquatic toxicity, are non-bioaccumulative, and are formulated as drop-in replacements for conventional mineral oils, with the high film strength and oxidation stability mining duty demands.
The BioMax Advantage in Environmentally Sensitive Mining
Mining equipment operates at the limit of its design envelope, often in conditions where any fluid release has immediate environmental consequence. BioMax synthetic EALs are formulated using stable hydrocarbon synthetic base oil technology that delivers full performance without compromise on sustainability.
- Verified EAL Performance: BioMax synthetic EALs meet leading global standards for biodegradability, aquatic toxicity, and bioaccumulation, supporting compliance with regional regulatory frameworks and watershed-protection requirements at sensitive mine sites.
- High Film Strength for Mining Duty: Advanced synthetic chemistry maintains protective films under the shock loads, high temperatures, and continuous duty cycles typical of haul trucks, shovels, draglines, and processing plants.
- Extended Drain Intervals: Strong oxidation stability supports drain intervals significantly longer than conventional mineral oils, reducing lubricant volumes, waste handling, and dockside or shop interventions in remote mining operations.
- Rapid Water Separation and Wet-Service Stability: Wet conditions are constant in many mines. BioMax synthetic EALs separate quickly from water and resist hydrolysis, preventing emulsions, sludge, and accelerated wear in continuously wet service.
Comprehensive Reliability Solutions
Mining runs the highest-cost mobile assets in industry in some of the worst conditions. Lubrication programs earn their keep by extending component life on those assets.
- Condition Monitoring: Sampling on haul truck hydraulics, final drives, shovels, and mill drives, aligned to the component lives that drive your maintenance budget.
- Technical Problem-Solving: Applications support for extreme-pressure duty, wet and dusty service, and the underground conditions that defeat conventional products.
- Consulting Expertise: Conversion planning focused on the environmentally sensitive zones first, then extended across the fleet.
- Sustainability Roadmap: Documentation supporting permit conditions, tailings and watershed requirements, and community and investor reporting.
Best Practices for Mining Lubrication
In mining, lubrication practice shows up directly in component life and in environmental exposure.
- Convert the Sensitive Zones First: Equipment working near tailings, watercourses, and reclamation areas carries the highest consequence. Start there and extend outward.
- Select for Contamination Tolerance: Water and dust are constant. Choose products that hold film strength when contaminated rather than only when clean.
- Protect Storage and Transfer Onsite: Site storage is exposed storage. Sealed containers, covered lay-down areas, and dedicated transfer equipment prevent most avoidable contamination.
- Set Rope and Pin Lubrication by Condition: Dragline ropes, hoist cables, and slew bearings need intervals driven by inspection findings rather than a fixed calendar.
- Trend Component Life Against Fluid Changes: Track component life before and after conversion. That number is the business case.
Mining Applications and Equipment Coverage
Every asset in a mining operation contributes to production and to environmental risk. BioMax offers application-specific synthetic EALs for surface, underground, and processing equipment, particularly where mines are pursuing sustainability or regulatory targets.
Haul trucks, excavators, loaders, dozers, and shovels operate continuously under heavy and shock loads. BioMax synthetic hydraulic EALs, gear oils, and greases protect drivetrain, hydraulic, and pivot systems while supporting EAL programs where sensitive watersheds or reclamation areas are involved.
Continuous miners, longwalls, shuttle cars, scoops, and load-haul-dump (LHD) units operate in confined, high-risk environments where heat, fines, and water are constant. BioMax synthetic gear EALs and greases provide film strength, thermal stability, and water resistance for underground production equipment.
Crushers, vibratory screens, mill drives, and conveyors run continuously in vibration, dust, and water. BioMax synthetic EP gear oils and greases handle heavy shock loads, particulate ingress, and continuous duty cycles in mineral processing.

Your challenge:
Heavy Loads, Wet Service, Watersheds You Answer For
Haul trucks, shovels, and mill drives carry the heaviest loads in industry, often in tailings-adjacent or reclamation-adjacent zones where a hydraulic release becomes a regulatory and community issue. Water, dust, and shock loading degrade conventional fluids quickly, and a failed final drive is a week of production.
OUR Solution:
EALs Built for Mining Duty
BioMax synthetic hydraulic fluids, gear oils, and greases hold film strength under shock and extreme pressure, resist water washout and dust contamination, and protect the mobile and fixed plant assets that set production rate.
Your Reward:
Production Protected and Environmental Exposure Reduced
Mines extend component life on the highest-cost assets, cut lubricant-related downtime in wet and dusty service, and lower the environmental consequence of operating near tailings, watersheds, and reclamation areas.
Mining Equipment and Lubricant Recommendations
| Equipment/Application | Lubricant Type | BioMax Product | Key Benefits |
|---|---|---|---|
| Haul truck and earthmover hydraulics | EAL hydraulic fluid | BioMax™ Hydraulic EAL | High film strength under shock and load; drop-in replacement for mineral oil hydraulic systems. |
| Shovel, dragline, and crusher hydraulics | EAL hydraulic fluid | BioMax™ Hydraulic EAL | Water-washout resistance and stable film under continuous heavy-duty service. |
| Underground production equipment (LHDs, continuous miners) | EAL gear oil / hydraulic fluid | BioMax™ Gear EAL / BioMax™ Hydraulic EAL | Heat and water resistance for confined underground service; protects critical mobile assets. |
| Conveyor and plant drives | EAL gear oil / coupling grease | BioMax™ Gear EAL / BioMax™ MP EP Grease | Resists oil separation under high centrifugal forces; protects against fretting in high-speed couplings. |
| Crushers and mill drives | EAL gear oil | BioMax™ Gear EAL | Extreme-pressure protection for heavy shock loads; rapid water separation for easier maintenance. |
| Chassis, pins, bushings, slew bearings | EAL grease | BioMax™ MP EP Grease | Superior water washout resistance and mechanical stability under heavy load. |
| Wire ropes, dragline ropes, hoist cables | EAL wire rope grease | BioMax™ MP EP Grease | Penetrates to the rope core; non-tacky outer film resists dust pickup. |
| Tailings, watershed, or reclamation-adjacent equipment | EAL hydraulic / grease | BioMax™ Hydraulic EAL / BioMax™ MP EP Grease | Readily biodegradable, low aquatic toxicity, non-bioaccumulative for environmentally sensitive zones. |
BioMax offers a synthetic EAL portfolio well suited to environmentally sensitive mining, including hydraulic fluids, gear oils, and greases, including high-tack wire-rope grease, with established OEM approvals across leading heavy-equipment manufacturers.
Featured BioMax Lubricants for Mining
BioMax Lubricants — Proven Results, Measurable Impact
Specialized Knowledge
Technical Support
Ongoing Innovation
Mining operators that adopt BioMax synthetic EALs in environmentally sensitive applications typically report:
- Reduced environmental risk and remediation exposure in tailings, watershed, and reclamation areas.
- Stronger social-license and regulatory posture in regions with rising EAL expectations.
- Extended drain intervals and reduced lubricant consumption across mixed fleets.
- Verified sustainability performance that supports corporate ESG and community-engagement reporting.
Schedule a Mining Lubrication Audit
Reduce environmental exposure, strengthen reliability, and align your lubrication program with rising regulatory expectations. Contact a BioMax Technical Consultant to schedule a mining lubrication audit and develop an EAL conversion plan focused on your most sensitive applications.