Skip to main content

Synthetic EAL Solutions for Power Generation

Power Generation Needs High Performance Lubrication

Power generation is under simultaneous pressure to maximize uptime, modernize aging assets, and accelerate sustainability commitments. Hydro stations sit directly on waterways. Wind farms operate in remote, environmentally sensitive locations onshore and offshore. Gas turbines, steam plants, and reciprocating engines all run hydraulic and lubrication systems that can leak into the surrounding environment. Operators need lubricants that hit reliability and ESG targets at the same time.

BioMax™ delivers synthetic Environmentally Acceptable Lubricants (EALs) engineered for hydroelectric, wind, gas turbine, steam, and reciprocating-engine power generation. BioMax lubricants are readily biodegradable, exhibit low aquatic toxicity, are non-bioaccumulative, and deliver high film strength and oxidation stability for the long service intervals modern power plants require

The BioMax Advantage in Power Generation

Generation assets are designed for decades of service. The fluids that protect them need to deliver predictable performance, support sustainability mandates, and minimize environmental risk on every site.

Power Generation Applications and Equipment Coverage

Power generation portfolios span hydro, wind, gas, steam, and engine assets, all with distinct lubrication demands. BioMax offers application-specific synthetic EALs across the portfolio.

Hydroelectric dam with water released through the gates
Offshore wind turbines with a service vessel
Water regulation equipment inside a power plant

Kaplan and Francis turbine governors, wicket gates, runner hubs, intake gates, and submerged hydraulic actuators all operate in direct contact with surface water. BioMax synthetic hydraulic EALs protect these assets while supporting environmental commitments and watershed protection.

Hydroelectric dam with water released through the gates

Wind turbine gearboxes, yaw and pitch hydraulics, and hub greasing points all require lubricants that perform reliably across wide temperature ranges and long service intervals. Offshore wind installation vessels add EAL-required marine duty to the program. BioMax synthetic gear and hydraulic EALs support both onshore and offshore wind assets.

Offshore wind turbines with a service vessel

Hydraulic power units, valve and damper actuators, cooling-water pumps, fuel and biomass handling drives, and outdoor material-handling equipment operate throughout the generating station, often near drains, cooling ponds, and discharge canals. BioMax synthetic hydraulic EALs, gear EALs, and greases protect these assets and bring environmentally sensitive areas of the plant under a single lubricant program.f

Water regulation equipment inside a power plant

Comprehensive Reliability Solutions

Power generation assets are expensive to reach and expensive to take offline. The lubrication program should be designed around intervention cost, not unit price.

  • Condition Monitoring: Sampling on hydro governor and gate hydraulics, wind gearboxes, and balance-of-plant systems, targeting the water ingress and oxidation that drive most fill changes.
  • Technical Problem-Solving: Applications support for submerged actuators, wind gearbox service, and the long fill lives these assets demand.
  • Consulting Expertise: Asset conversion planning sequenced around outage schedules, so changeovers happen when the unit is already down.
  • Sustainability Roadmap: Environmental documentation that feeds permit compliance, watershed reporting, and corporate sustainability disclosure.

Best Practices for Power Generation Lubrication

When a fill change means a crane or a dewatering, the practices that extend fill life are the ones that matter.


Hydroelectric dam spillway in a forested valley

Assets in Direct Contact With Water You Are Accountable For

Hydro governors, wicket gates, and intake actuators operate in or above the water body the plant discharges to. Wind assets sit in exposed locations where a gearbox or bearing intervention means a crane and a lost generation day, and any release becomes a regulatory event.

EAL Coverage Across Hydro, Wind, and Balance of Plant

BioMax synthetic hydraulic fluids, gear oils, and greases protect submerged and exposed assets alike, holding oxidation stability for long fill life and resisting the water ingress that degrades conventional fluids in these services.

Longer Fills, Fewer Interventions, Cleaner Compliance

Plants extend intervals on hard-to-reach fills, reduce unplanned interventions on hydro and wind assets, and carry verified environmental data into permit and sustainability reporting


Power Generation Equipment and Lubricant Recommendations

Equipment/ApplicationLubricant TypeBioMax ProductKey Benefits
Hydroelectric turbine
governors and gates
EAL hydraulic fluidBioMax™ Hydraulic EALStable in the presence of water; readily biodegradable, low aquatic toxicity; protects against rust and corrosion in submerged service.
Hydroelectric wicket-
gate and runner-hub
hydraulics
EAL hydraulic fluidBioMax™ Hydraulic EALDrop-in replacement with broad seal compatibility; high film strength under load reversal.
Wind turbine main
gearboxes
EAL gear oilBioMax™ Gear EALLong service life and high film strength for heavily loaded planetary and helical gear sets.
Wind turbine yaw and
pitch systems
EAL hydraulic fluid / greaseBioMax™ MP EP GreaseReliable performance across wide temperature ranges; corrosion protection for exposed hub and nacelle components.
Offshore wind
installation vessels
EAL hydraulic / gear / stern tubeBioMax™ Hydraulic EAL / BioMax™ Gear EAL / BioMax™ Stern Tube EALComplete marine EAL coverage for vessel-side propulsion and deck systems.
Intake gates, spillway
gates, penstock
actuators
EAL hydraulic fluidBioMax™ Hydraulic EALRust and corrosion protection for intermittent-duty actuators submerged in or exposed to river and reservoir water.
Hydro turbine guide
bearings and speed
increasers
EAL gear oilBioMax™ Gear EALHigh film strength and oxidation stability for continuously loaded bearing and gear sets in hydro service.
Wind turbine main,
blade, and yaw
bearings
EAL greaseBioMax™ MP EP GreaseMechanical stability and corrosion protection for slow-moving, heavily loaded bearings in exposed nacelle and hub locations.
Bearings, linkages,
pivots
EAL greaseBioMax™ MP EP GreaseHigh load capacity and water resistance for exposed plant grease points.

BioMax offers a comprehensive synthetic EAL portfolio for power generation, including hydraulic fluids, gear oils, greases, and stern tube oils.

BioMax Lubricants — Proven Results, Measurable Impact

Utilities, IPPs, and renewable power operators that standardize on BioMax synthetic EALs typically report:

  • Reduced environmental risk on hydro stations, offshore wind sites, and watershed-adjacent plants.
  • Verified sustainability performance that supports utility ESG reporting and renewable-energy commitments.
  • Longer drain intervals and reduced lubricant consumption across the fleet.
  • Tighter alignment with global regulatory frameworks for environmentally sensitive generation assets.

Schedule a Power Generation Lubrication Audit

Strengthen reliability, support sustainability commitments, and reduce environmental exposure across your generation portfolio. Contact a BioMax Technical Consultant to schedule a power generation lubrication audit and develop a plant-by-plant EAL conversion plan for your operation.